1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33056
1.1 Introduction
E1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
Thank you for choosing the TOSHIBA B-SX6T series thermal printer.
This Owner’s Manual contains from general set-up through how to
confirm the printer operation using an online test print, and should be
read carefully to help gain maximum performance and life from your
printer. For most queries please refer to this manual and keep it safe for
future reference. Please contact your TOSHIBA TEC representative for
further information concerning this manual.
This printer has the following features:
• Various kinds of interface
Various kinds of interface are provided:
<Standard> <Option>
• Parallel • Serial
• USB • Wireless LAN
• LAN • Expansion I/O
• Superior hardware
Clear print quality is realised by an 12 dots/mm (305 dpi) print head, at
a printing speed of 76.2 mm/sec. (3 inches/sec.), 101.6 mm/sec. (4
inches/sec.), or 203.2 mm/sec. (8 inches/sec.)
• Heavy-duty enclosure
As the enclosure is made of metal, the printer can be used in an
industrial environment such as a factory.
• A variety of options
The following optional devices are available:
• Cutter module
• Strip module
• Serial interface board
• Wireless LAN board
• RFID module (Future option)
• Ribbon Saving Module
• Metal Supply Cover (Future option)
• Expansion I/O board
• Real Time Clock
To Next Page
Loading...
