2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.4 Loading the Media
E2- 5
2.4 Loading the Media
(Cont.)
4. Install the other Media Holder onto the Supply Shaft from the
opposite side.
5. Turn the Locking Lever of the Media Holder to the “Close” position.
6. Set the Head Lever to the “OPEN” position.
7. Open the Top Cover and the Right Side Cover.
8. Open the Head Lock Plate (c), and turn the Pinch Roller Lever
clockwise (d) to release the Pinch Roller.
Top Cover
Right Side Cover
Media Holder
Supply Shaft
Locking Lever
“Close” Position
Media Holder
Media
Head Lock Plate
Pinch Roller Lever
c
d
Head Leve
To Next Page
Loading...
