Toshiba B-SX6T Series - Page 45

2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.8 Setting an Operating Environment
E2-31
2.8.1 Parameter Setting
(Cont.)
(20) Web Printer Function Selection
This parameter is to choose whether to use the printer as a web printer.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the Web printer function, press the [PAUSE] key.
(21) Media Sensor Selection
This parameter is to choose the media sensor type to be used.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the media sensor type, press the [PAUSE] key.
NOTE:
When “WEB PRINTER ON” is
selected, the status of the printer
connected in a network can be
checked through the Web browser.
<2>PARAMETER SET
SENS POSI CENTER
SENS POSI CENTER
SENS POSI EDGE
[RESTART]
[FEED]
Fixed sensor
Movable sensor
<2>PARAMETER SET
WEB PRINTER OFF
WEB PRINTER OFF
WEB PRINTER ON
[RESTART]
[FEED]
Unavailable
Available