Timer Setting 127
Timer Setting
This section describes how to set the following timers.
AUTO CLEAR: Time until the selected setting is cleared automatically
AUTO LOW POWER: Time until the low power mode is entered
AUTO SLEEP: Time until the sleep mode is entered after the low power mode has
been entered
For the low power mode and sleep mode, see the following page:
P.25 “Energy saving features”
Time of automatic function clear
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “GENERAL SETTING” with and buttons, and then
press the [ENTER] button.
USER FUNCTIONS
1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
To Next Page
Loading...
