3 COPYING FUNCTIONS
66 Before Making Copies
Before Making Copies
Default settings
Initial settings established when the equipment is powered on before any of the user functions
are changed are called default settings. Each setting returns to its default when the power is
turned ON, when the energy saving mode is cancelled, and when the [FUNCTION CLEAR] but-
ton is pressed.
The default settings of the basic copying functions at the time of the installation are shown
below.
The default settings above can be changed. For the details, see the following page:
P.115 “CHANGING EQUIPMENT’S SETTINGS”
Confirming set functions
Press the [SETTINGS] button to confirm the set functions.
The current settings and functions set appear on the LCD screen.
Press the selecting buttons (Centre, Right) to display all the settings so that the display will be
switched to the next one. This can also be done with the or button. After you finished the
confirmation, press the [SETTINGS] button again.
Item Contents Default setting at installation
Copy quantity 1 - 999 1
Paper selection Automatic paper selection (APS), Man-
ual paper selection
Automatic paper selection (APS)
Reproduction ratio 25 - 200% 100%
Image mode TEXT/PHOTO, PHOTO, TEXT TEXT/PHOTO
Density adjustment Automatic copy density mode, Manual
copy density mode
Automatic copy density mode
NONSORT
2IN1 1>1 SIMPLEX
To Next Page
Loading...
