Zooming In/Out Copy Image 75
Specifying reproduction ratio manually
1
Place paper in the drawer.
2
Place the original.
3
Press the selecting button (Left).
The LCD screen shows as follows:
4
Press the selecting button (Centre: – or Right: +) to set the desired
reproduction ratio.
One press of each button increases or decreases the reproduction ratio by 1%. When
you keep pressing either of them, the reproduction ratio also keeps changing. The
reproduction ratio can be set from 25% to 200%.
Press the selecting button (Left) to return it to 100%.
5
Press the [ENTER] button.
The reproduction ratio is set.
6
Press the [COPY] button several times until the lamp of the desired
paper size is lit.
e.g.) Selecting A4 for copy paper
y You can select the desired paper size with the [DRAWER] button in the same proce-
dure.
y When standard size paper other than A3, A4, A4-R, A5-R or B4 is placed, register
this size as “OTHER” size in advance.
P.49 “Registering other standard sizes”
7
Select the other copy modes as required, and then press the
[START] button.
ZOOM
100%
+-100%
25% ---- 200%
To Next Page
Loading...
