Making Copies 59
Stopping/Resuming copying
Press the [CLEAR/STOP] button to stop scanning or copying.
1
Press the [CLEAR/STOP] button during scanning or copying.
Scanning or copying stops, and the LCD screen shows as follows:
Or
Press the selecting button (Right) or and buttons and select “YES” to end the
copy job. Then press the [START] or [ENTER] button.
2
Press the selecting button (Right) to select “NO” to resume the
copy job. This can also be done with the or button. Then
press the [START] or [ENTER] button.
The LCD screen shows as follows:
3
Press the [START] button.
Memory clear?
YES
NO
Cancel job?
YES
NO
Press START to resume
3
100% NONSORT
Z
To Next Page
Loading...
