5 CHANGING EQUIPMENT’S SETTINGS
164 Pop-Up Display Setting
If “ON” is selected, a message appears when the drawer is closed.
If you set “ON” for “DRAWER SET POP-UP”, a message will appear when the drawer is closed.
In this case, register the paper size according to the following procedure.
1
If you placed paper whose size is different from that of the paper
previously set, select “YES”. If not, select “NO”.
If you select “NO”, the operation is completed.
If you select “YES”, proceed to step 2.
2
Select the size of the paper which has been placed with and
buttons, and then press the [ENTER] button.
The paper size is registered.
If more than one drawer is closed at the same time, the size of the paper set in the
drawer that was closed first is applicable to the registration. Set the paper size for the
subsequent drawers separately.
P.123 “Paper Size Setting”
Did you change paper size?
1.YES
2.NO
Select paper size
02.A4
03.A4-R
01.A3
To Next Page
Loading...
