1 PREPARATION
42 Preparation 2 - Placing Copy Paper
y The maximum number of sheets that can be placed at one time is 250 (64 to 80
g/m
2
). Be sure that the stack height of paper is not higher than the line indicated at
the inner side of the side guide and trailing guide.
P.38 “Acceptable media types”
y Fan the paper well before placing it in the drawer, otherwise multiple feeding could
occur. Be careful that the paper does not cut your fingers.
y Place the paper face up. You may tell its “face” by the note on its wrapping paper.
7
Adjust the side guides to the desired paper size.
Be sure that a gap of approx. 0.5 mm (less than 1.0 mm in total) is left between the paper
and each side guide (shown as “A” in the picture). If the gap is inappropriate, this could
cause a paper misfeed.
8
Be sure that the stack of paper fits completely under the latches of
the side guides.
A
To Next Page
Loading...
