1 PREPARATION
50 Preparation 3 - Registering Size of Paper Placed
2
Press the [DRAWER] button several times until the lamp of the
drawer in which you placed paper is lit.
3
Press the [COPY] button several times until the [OTHER] lamp is lit.
4
Press the selecting buttons (Centre, Right) to select the size of the
paper placed in the drawer. This can also be done with the or
button.
e.g.) Setting LT size
5
Press the [ENTER] button.
The LCD screen shows as follows:
6
Press the [ENTER] button.
The paper size has been registered as “OTHER” size and the equipment will return to its
normal status.
Select paper size
LT-R
LG
LT
Select paper size
1
100% NONSORT
Z
To Next Page
Loading...
