14 Clearing a Paper Misfeed
0.Clearing a Paper Misfeed
Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the touch
panel as follows:
1. Error code
2. Error message
3. Guidance for clearing paper misfeeds
4. Paper misfeed symbols
The paper misfeed symbol helps you locate the paper misfeed.
1. RADF or DSDF (lower) ( P.16)
2. RADF or DSDF (upper) ( P.17)
3. Job Separator, Offset Tray ( P.36) or Bridge Kit ( P.37)
4. Paper transport path ( P.33)
5. Fuser unit ( P.34)
6. Automatic duplexing unit ( P.32)
7. Bypass tray ( P.31)
8. Drawer feeding portion ( P.23)
9. External Large Capacity Feeder (2000 sheets) ( P.22)
10. Large Capacity Feeder ( P.25) or Paper Feed Pedestal ( P.26)
11. Drawers ( P.27, P.28), Envelope Drawer ( P.29) or drawer of the Large Capacity Feeder ( P.30)
12. Hole Punch Unit ( P.38, P.43, P.53)
13. Saddle stitch unit ( P.47)
14. Finisher ( P.38, P.43, P.53)
The picture of the hardware device shown on the touch panel differs depending on the options installed.
1
2
4
3
1214 13 8
21 4 53 6 7
9
1011
To Next Page
Loading...
