1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 27
TROUBLESHOOTING FOR THE HARDWARE
Drawers (e-STUDIO2020AC/2520AC)
The first drawer
1
Open the drawer, press the paper down until the plate clicks and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading (especially
for thick paper), and then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for thick paper is not exceeded when placing thick paper in the first
drawer. The amount of thick paper you can load in the drawer is lower than that for plain paper.
To Next Page
Loading...
