98 When Paper Has Been Curled
0.When Paper Has Been Curled
If you use e-STUDIO2525AC/3025AC/3525AC, the output paper may be curled on the exit tray when printing of a large
number of sheets of thin and small size paper (A4-R or smaller) is performed. In such a case, remove the parts (“A”
indicated in the figure) from the paper exiting section of the equipment.
When printing of a large number of large size sheets such as A3 and A4/LD and LG is performed, return those parts (“A”
indicated in the figure) to their original location.
Removing the parts (“A” indicated in the figure)
1
Turn off the power of the equipment.
2
Remove the parts (“A” indicated in the figure) attached to the paper exiting section.
Keep the removed parts.
Returning the parts (“A” indicated in the figure) to their original location
1
Turn off the power of the equipment.
2
Install the parts (“A” indicated in the figure) in the paper exiting section in the direction of the
figure.
A
A
A
A
To Next Page
Loading...
