e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 101
3. Printer-specific Adjustments
(2) Change the "Sharpness" option on the printer driver.
For Windows
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Set the value for "Sharpness" within a range of "-4" to "4" or to "OFF" in the "Image Attribute" tab.
The value "OFF" of sharpness intensity adjustment is positioned as shown below.
PCL6 PS3 XPS
To Next Page
Loading...
