e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
5 - 5
5. Scanning-specific Adjustments
5.3 To Clearly Scan and Print an Original in Black and White
(To improve gradation and reduce graininess)
Before the adjustment After the adjustment
If the original is scanned in the Black mode,
the halftones may become blurred in black.
The halftones of the scanned-in image are
clearly printed out.
Explanation
If an original is scanned in the Black mode, a difference in the density level of the halftones cannot be accurately
scanned. As a result, it may become blurred in black or grained. Scan a black-and-white original in the Gray
scale mode, in order to scan and print it out in black and white more clearly.
Procedures
* Both the service technician and the user can perform all adjustments.
(1) When scanning the original, press the [SCAN SETTING] button on the Control Panel. Select "IMAGE
SMOOTHING" from among the color mode options.
Precautions after the completion of the adjustment
The adjustment may possibly increase the size of the file to be stored. Therefore, carefully perform the
adjustment, while checking the scanned-in image quality. The correlation between color mode and file size is as
described below. (The ratio of the file size may vary depending on the type of original. Therefore, use the
description below just for your reference.)
* Ratio of the file size in the Black mode to the Gray scale mode
• If the file size in the Black mode with the Text mode selected is 1, it will be increased to approximately 7 times
in the Gray scale mode.
• If the file size in the Black mode with the Photo mode selected is 1, it will be approximately doubled in the
Gray scale mode.
To Next Page
Loading...
