e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 31
6. Printer-specific Adjustments (GA-1211)
6.4 To Print with Profile Attached to Image
Before the adjustment After the adjustment
The default profile of the GA-1211 is given
priority over a profile attached to the image
file.
The image file is printed with the attached
profile.
Explanation
When the GA-1211 is used for printing, the default profile of the GA-1211 has the first priority. Therefore this
default profile may be used even if a color profile is attached to the image file. In this case, the attached profile can
be applied instead of the default GA-1211 profile by changing the setting of the printer driver.
Procedures
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can perform all adjustments.
* All the adjustments will be effective only when images are printed with PS3 printer driver in the Full color mode.
Print Print
Attached profile Attached profile
Default profile Attached profile
To Next Page
Loading...
