e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 32
6. Printer-specific Adjustments (GA-1211)
(1) Open the printer driver properties and then click the [Color] icon on the [Fiery Printing] tab page.
(2) Click [Expert Settings] of the Print Mode setting.
• The Expert Color Settings menu appears.
(3) Select “None” for “RGB Source Profile”.
* “Fiery RGB” is selected by default.
Precautions after the completion of the adjustment
Nothing in particular.
(2)
(1)
To Next Page
Loading...
