e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 7
6. Printer-specific Adjustments (GA-1211)
Differences in features between calibrations from Calibrator and MFP touch panel
Features
ColorWise Pro
Tools
Touch panel
Figuring out the status of the last calibration with Configuration
Page.
9
Specifying Calibration Sets
9 9
Specifying an input (feeding) tray (e.g. LTR, bypass tray)
9 9
Setting “Apply to all calibration sets”
9
Specifying multiple profiles and the desired Calibration Set
9
Specifying the number of Measurement Pages
9
Specifying the Patch Page number of Measurement Page (only
for ColorCal)
9
Calibrating the scanner (ColorCal)
9
Displaying a warning message when the Calibration Set is not
assigned to a profile
9
Printing (built-in) sample images before applying calibration
results
9
Printing sample images of a user file before applying calibration
results
9
Saving or downloading calibration data in or from a computer
9
Checking gamma for calibration
9
Checking gamma of the controller after calibration results are
applied (also use Command WorkStation)
9
To Next Page
Loading...
