e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 24
6. Printer-specific Adjustments (GA-1211)
(6) Check [Use media defined profiles if available] on the Default output profile field of the Advanced Edit menu.
(7) Select “Use Server’s Default” for “Output Profile” of “Expert Settings” of the printer driver menu, or select
[Use Media Defined Profile] for the printer driver.
Precautions after the completion of the adjustment
Be sure to check [Use media defined profiles if available] at the Default output profile of Advanced Edit when
two-way communication is disabled and “Use Server’s Default” is selected for “Output Profile”.
To Next Page
Loading...
