5 Printing from Windows
196 Before Using the Printer Driver
2
Display the [Configuration] tab, check on “Enable SNMP Communi-
cation”, and click [Update Now].
y The printer driver starts communicating with system and obtains option settings auto-
matically.
If the connection to the equipment has not been configured correctly, the message “The
address of your printer could not be located. Would you like to find it?” will be displayed.
If it is displayed, click [Yes] and search for the equipment using the TopAccessDocMon
Local Discovery dialog box. After searching the equipment, SNMP communication will
be enabled. For the instructions on how to search the equipment, refer to the instructions
of TopAccessDocMon.
3
If you want to update option settings automatically when the [Con-
figuration] tab is opened, select on “Update Automatically”.
4
Check the “Override Application Paper Settings” option if you want
to use the paper source setting in the printer driver rather than the
application setting.
To Next Page
Loading...
