Setting Up Print Options 209
Setup Tab
The Setup tab contains basic print operation settings, such as original paper size, print paper
size, paper source, paper type, orientation, number of copies, and so on. Also this tab allows
you to enable enlarge/reduce printing, sort printing, stapling and punching, and 2-sided printing.
1) Original Paper Size
This selects the size of a document to be printed.
y The default paper size will be “Letter” or “A4” according to the regional setting in the Win-
dows.
y “Envelope COM10”, “Envelope Monarch”, “Envelope DL”, “Envelope Cho-3”, and “Enve-
lope You-4” are only available for e-STUDIO282 Series.
2) Manual Scale
Check this box to manually enter the zoom ratio, to enlarge or reduce an image. You can set
any integer from 25 to 400(%) for the zoom ratio. This is not available when you enable the
Booklet printing.
3) Print Paper Size
Select this to enlarge or reduce a page image to fit exactly in the selected paper size. If you
do not wish to enable enlarge or reduce printing, select “Same as Original Size”.
Also when you want to enable Tab printing, select “Letter Tab” or “A4 Tab” here. When you
select “Letter Tab” or “A4 Tab”, the Primary Tab dialog box appears.
Available original paper sizes are listed below:
y Letter
y Ledger
y Legal
y Statement
y Computer
y 13”LG
y 8.5”SQ
y A4
y A5
y A3
y B4
y B5
y Folio
y A6
y 8K
y 16K
y Envelope COM10
y Envelope Monarch
y Envelope DL
y Envelope Cho-3
y Envelope You-4
10
1
2
3
4
5
6
7
8
9
11
To Next Page
Loading...
