Setting Up Print Options 237
If the connection to the equipment has not been configured correctly, the message “The
address of your printer could not be located. Would you like to find it?” will be displayed
when you click [Update Now]. If it is displayed, click [Yes] and search for the equipment
using the TopAccessDocMon Local Discovery dialog box. After searching the equipment,
the SNMP communication will be enabled. For the instructions on how to search the equip-
ment, refer to the instructions of TopAccessDocMon.
P.336 “Searching for a Printer”
15) Update Automatically
Check this to update the configuration information every time the printer driver is opened.
This is available only when “Enable SNMP Communication” is checked.
If the connection to the equipment has not been configured correctly, the message “The
address of your printer could not be located. Would you like to find it?” will be displayed
when the Configuration tab is displayed. If it is displayed, click [Yes] and search for the
equipment using the TopAccessDocMon Local Discovery dialog box. After searching the
equipment, the SNMP communication will be enabled. For the instructions on how to search
the equipment, refer to the instructions of TopAccessDocMon.
P.336 “Searching for a Printer”
About Tab
The About Tab contains information about the printer driver’s version.
To Next Page
Loading...
