Printing with Extended Print Functionality 247
Printing enlarged or reduced image to fit specified paper size
1
Display the General tab and select the document size on the “Origi-
nal Paper Size” drop down box. Then select the paper size that you
want to print at the “Print Paper Size” drop down box.
y The document image is automatically enlarged or reduced depending on the original
paper size and print paper size.
2
Set any other print options you require and click [OK].
3
Click [OK] or [Print] to send the print job.
y Enlarged or reduced image is printed to fit specified paper size.
Printing an enlarged or reduced image by specifying the zoom ratio
manually
1
Display the General tab and check the “Manual Scale” box. Then
enter the percentage of zoom ratio.
y The zoom ratio can be set from 25% to 400% in units of 1%.
2
Set any other print options you require and click [OK].
3
Click [OK] or [Print] to send the print job.
y Enlarged or reduced image is printed by specified zoom ratio.
Stapling and Hole Punching
You can staple and punch the paper.
y Stapling is not available if a finisher is not installed.
y Hole Punching is not available if a hole punch unit is not installed.
To Next Page
Loading...
