Toshiba E-STUDIO 2500C - Setup Flow for FTP Printing

5 SETUP FLOW
62 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for FTP Printing
FTP printing allows users to send a print file using the FTP protocol from anywhere you can
access to this equipment.
This equipment supports FTP printing which enables to print a file sent through FTP protocol.
Users can send a print file using the FTP download tools to this equipment from any operating
systems.
This equipment can print following files using the FTP printing:
y PCL format print job file
y PostScript Level 3 print job file
y Text data file
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Set up the FTP Server
setting
Enable the FTP Server option using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the FTP Server”
Connecting over TCP/IP Network
Sending a print file
using FTP

Ð

Ð
Ð

Ð

Ð
Ð

Ð
Ð
