Toshiba E-studio 281c - 1. Color Balance (YMCK Adjustment)

126
4.SETTING ITEMS (ADMIN)
2.SETTING GENERAL FUNCTIONS (Cont.)
4
Setting the Calibration Display Level
You can set whether this equipment uses the calibration settings that are operated by a user or administra-
tor.
When you select the Admin mode for the Calibration Display Level, the [CALIBRATION] button under the
[USER] menu disappears. When you select the User mode for the Calibration Display Level, the [CALI-
BRATION] button under the [ADMIN] menu disappears.
1
Press the [GENERAL] button.
• The GENERAL menu is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”.  P.109
2
Press the [CALIBRATION DISPLAY LEVEL] button.
• The CALIBRATION DISPLAY LEVEL screen is displayed.
3
Press the [ADMIN] button to enable the administrator’s calibration
setting, or [USER] button to enable the user’s calibration setting.
• The Calibration Display Level setting is completed.