100 Printing Guide — Installing Client Software for Windows
4. Select the equipment that you want to connect and click [OK].
5. It automatically obtain the network queue in the “Network
path or queue name” field.
NOTE: • It automatically obtains the IP address of the equipment and the queue name speci-
fied by an administrator, in the “Network path or queue name” field in the General
submenu page of the Setup menu in the TopAccess administrator mode. If you can-
not obtain the queue name, ask your administrator that the “Network path or queue
name” field is correctly specified.
6. Continue the installation from step 10 on page 94.
Installation for SMB Printing by Point and Print
The procedure to install the printer driver for SMB printing by Point and Print differs depending
on the version of Windows used.
P.101 "Windows 98/Me"
P.103 "Windows NT 4.0/2000/XP/Server 2003"
To Next Page
Loading...
