150 Printing Guide — Installing Client Software for Windows
6. Enter the network queue name that was created on the Net-
Ware file server in the “Enter a port name” field, and click
[OK].
If the NetWare has been set up for the Bindery mode, enter as the following in
the “Network path or queue name” field:
\\<NetWare file server name>\<queue name>
Example: NetWare file server name=Nwsrv, queue name=mfp_00c67861
\\Nwsrv\mfp_00c67861
If the NetWare has been set up for the NDS or NDPS mode, enter as the follow-
ing in the “Network path or queue name” field:
\\<Tree>\.<queue name>.<Context>.<Tree>
Example: Tree=ORG, queue name=mfp_00c67861, Context=Dept1
\\Org\.mfp_00c67861.dept1.org
SUPPLEMENT: • The queue for this equipment should be set up by an administrator. If you do not
know the queue for this equipment, ask your administrator.
7. Click [OK] to save settings.
To Next Page
Loading...
