211
7
6
The corresponding buttons of the template registered in the user
group are displayed. Press the blank key, and then press the [SAVE]
button.
7
Press the [NAME1] button and the [NAME2] button, and then enter the
template name.
• [NAME 1] is displayed in the upper side and [NAME 2] is displayed in the lower side of the template button.
Enter [NAME 1] and/or [NAME 2]. When both are entered, [NAME 1] is displayed in the upper side and [NAME
2] is displayed in the lower side of the button.
• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu ( P.35) is displayed. Up to 11 char-
acters can be entered.
• The following symbols cannot be used for [NAME 1] and [NAME 2].
["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]
To Next Page
Loading...
