212
7.TEMPLATE
2.Registering User Groups and Templates (Cont.)
7
8
Press the [USER NAME] button, and then enter the user name of the
template as required.
• When the [USER NAME] button is pressed, the letter entry menu ( P.35) is displayed. Up to 30 characters
can be entered.
• To set the password, proceed to step 9. If not, skip to step 11.
9
Key in the password in “Password” as required, and then press the
[SET] button.
• Be sure to key in the 5-digit password.
• * (asterisk) is displayed in “Password” when the password is entered.
• To correct the entered password, press the [CLEAR] button on the control panel.
• When the [SET] button is pressed, “Retype Password” becomes highlighted.
To Next Page
Loading...
