274
9.BLINKING GRAPHIC SYMBOLS
3.Replace Toner Cartridge Symbol (Cont.)
9
1
Open the front cover.
2
While pushing on the latch, lower the car-
tridge holder toward you.
3
Pull the cartridge out carefully.
• If you cannot pull it straight out, pull it out rotating it clockwise.
If it cannot be pulled out, close the front cover, turn the power OFF
and then ON again. When “Install new toner cartridge” appears,
start the procedure again from step 1.
Never attempt to incinerate toner cartridges. This could cause an
explosion. Do not dispose of used toner cartridges. Contact your
service representative.
4
Tap and shake the new toner cartridge
well to loosen the toner inside.
To Next Page
Loading...
