275
9
5
Stand the toner cartridge upright, and
pull out the seal in the direction of the
arrow.
6
Insert the cartridge completely.
• Match the label (orange) on the equipment with the shutter
(orange) on the toner cartridge, then insert it.
• If the inside of the equipment becomes dirty with toner, clean it
before inserting the cartridge.
7
Return the cartridge holder to its original
position.
8
Clean the charger.
• Hold the cleaning knob, pull it out slowly and fully to the front
and then push it back to the inside carefully and completely.
Repeat this 2 or 3 times.
Make sure that the charger knob is pushed in fully inside.
To Next Page
Loading...
