Toshiba e-STUDIO 356 - Paper Misfeed in the Bridge Kit (Optional)

1 TROUBLESHOOTING FOR THE HARDWARE
28 Clearing a Paper Misfeed
4
Close the cover inside of the equipment.
5
Close the automatic duplexing unit.
 Paper misfeed in the Bridge Kit (optional)
3
Close the Bridge Kit cover.
3
Remove the misfed paper.
1
Open the cover holding the handle of the Bridge Kit.
2
Remove the misfed paper inside the Bridge Unit.
If the misfed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on  P.24 “Paper misfeed
in the fuser unit”.