Page 10
Scan to File
In the SCAN TO FILE function, the scanned data can be sent and stored to the Shared folder of
the hard disc drive in the e-Studio device or a specified network folder. You can access the data
stored in the Shared folder directly from the client PC via the network. The network administrator
has to make settings for storing the original data to the network. It is recommended to back up
the data stored in the Share folder of the hard disc with the client PC via network.
1. Place the original(s) on the RADF. If there is not enough space in the hard disc, the
number of originals that can be scanned may be restricted.
2. Press the SCAN button on the control panel to enter
the scan menu.
3. Press the SCAN TO FILE button.
4. Press the FILE NAME button to enter the file name
of the scanned data. The letter entry menu is displayed.
A file name can contain up to 45 letters. After entering
the letters, be sure to press the ENTER button.
To Next Page
Loading...
