Page 23
Sending a Fax by Direct Dial
Direct Entry with Digital Keys
1. Place the original(s).
2. Press the FAX button on the control panel.
3. Key in the remote Fax number.
4. If you make a mistake, press the CLEAR button on
the control panel or the BACK SPACE button in the
address menu and correct the mistake.
y CLEAR button: Press this button to clear all values
you have entered.
y BACK SPACE button: Press this button to delete
each value you have.
TIP: When you are dialing to an outside line via a PBX, there may be a pause before
the connection is made, causing a transmission error. To avoid this error, press the
MONITOR/PAUSE button after the number that designates an outside line to enter
a pause. This automatically enters a thee-second pause before the remote Fax number
is dialed, which reduces transmission errors. (The mark “-” is displayed as a “pause”
on the screen.)
5. Press the START button.
To Next Page
Loading...
