Setting Up Print Options 237
5) Interleave Pages
This sets the interleaving page feature that is useful when you want to insert paper of a dif-
ferent type (or from another source) between every page of your print job. For example, you
could use this option to insert blank, colored sheets between overhead transparencies.
To enable interleaving pages, check on the box and select the location from where sheets
are to be fed.
y When this option is enabled as well as the “Use Front Cover” and “Use Back Cover”
options enabled, no page is inserted after the front cover and back cover.
y This option cannot be set when “Insert Pages” option is enabled.
Source
Select the location from where the interleaving sheet is to be fed. When “Auto” is selected,
the paper is automatically selected according to the printed document size.
The selectable values in the Source drop down menu vary depending on the optional
devices installed on this equipment and their configuration on the Configuration tab.
Duplicate
When you check on this, you can print previous page images on the inserted sheet.
Image Quality Tab
The Image Quality Tab allows you to select how images are printed. You can easily select
appropriate image quality depending on the type of document.
1) Halftone
This sets how halftone are printed.
For PCL6 printer driver, the following value can be set.
- Detail
— Select this to print halftone in detail.
- Smooth — Select this to print halftone smoothly.
For PS3 printer driver, the following values can be set.
2
3
1
4
To Next Page
Loading...
