2 Installing Client Software for Windows
68 Installing Client Software for SMB Printing
7
When the equipment is automatically found in the network, the
“Device on Network” option is selected and the found devices are
displayed in the list. Select the equipment that you want to connect
and click [Next].
y The Select Program Folder screen is displayed.
When the equipment is not automatically found in the network, the “Message” dialog box
appears. In that case, proceed the procedure below to select the network queue manu-
ally.
1. The “Message” dialog box appears, and click [Continue].
2. The Select Port screen is displayed, and click [Browse].
To Next Page
Loading...
