Page 11
Paper Level Indicator
Clearing the Functions Selected
1. If you press any button that is half-tone shaded, the function selected is cleared. Also, if
the copier is left inactive for a while, the automatic function clear works and the setting will
be cleared.
2. Automatic Function Clear: Even if you do not press the FUNCTION
CLEAR button, within the specified period of time (default setting: 45
seconds) after outputting is finished or after the last button is pressed in
a procedure, the automatic function clear mode will work to clear all
settings, and the basic screen of the copy function will be displayed.
Remaining Paper Level
Indicator appears here.
To Next Page
Loading...
