Page 16
How to Add Paper and Toner (Cont’d.)
Replacing the Toner Cartridge
When the toner in the cartridge runs out, the REPLACE TONER CARTRIDGE symbol
blinks and “Install new toner cartridge” appears.
Removing the Toner Cartridge
1. Open the front cover.
2. While pushing on the latch, open the cartridge holder.
3. Pull the cartridge out carefully.
4. If you cannot pull it straight out, pull it out rotating
it clockwise.
5. If it cannot be pulled out, close the front cover, turn
the power switch OFF and then ON again. When
“Install new toner cartridge” appears, start the
procedure again from step 1.
To Next Page
Loading...
