4 EDITING FUNCTIONS
130 Image Editing
Image Editing
You can select the various editing functions shown below for scanned images.
Trimming: You can select a certain area of an original and copy only the selected area.
Masking: You can mask a certain area of an original and copy only the unmasked area.
Mirror image: You can reverse an image like a mirror.
Negative/Positive reversal: You can reverse the light-and-dark of an image.
Trimming / Masking
You can select the desired area of an original and copy only the selected area (trimming). You can also mask
the desired area of an original and copy only the unmasked area (masking). On both functions you can select
up to 4 areas on 1 original. The selected area should be in a rectangle.
y Only standard size originals are applicable.
y Note that the entire image of the selected area may not be copied if you do not select proper sizes for
the original and copy paper.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Press [EDITING] on the EDIT menu.
Trimming Masking
To Next Page
Loading...
