Toshiba e-Studio 907 - Folding Function; Punch Function

17
COPY OUTPUT
Saddle
Stitch
Saddle Stitch
(When a saddle nisher is installed)
Copies can be folded at the center, stapled, and output.
(When a trimming module is installed on the saddle nisher)
For saddle folding, it trims a side drop, offering a good-looking output
image.
2-Sided
Scanning 2-Sided originals
Cover Setting
Tap this to switch the cover setting Off or On, or to
congure the paper tray settings.
Off
Releases saddle stitch
1-Sided
Scans 1-Sided originals
Left Binding
This selects left binding
Right Binding
This selects right binding
Trimmer
Setting
Trimmer Setting
(When a trimming module is installed on the saddle nisher)
Enabling "Saddle Stitch" allows you to congure the trimmer
settings.
Off
Turns off the trimmer setting
On
Turns on the trimmer setting
( 2.0㨪20.0 )
mm
20
Specify the trimming width
within the range of 2.0 to
20.0 mm
Punch function
(When a punch module is installed)
This function punches copies and outputs them. It is available for paper sizes 8-1/2
"
x11"R to 11"x17".
2 Hole Punch
3 Hole Punch
Punches holes during output
Folding function
(When a saddle nisher or folding unit is installed)
Copies can be folded and output.
Saddle
Fold
Selects saddle fold
Z-Fold
Selects Z-fold
C-Fold
Selects C-fold
Accord-
ion Fold
Selects accordion fold
Double
Fold
Selects double fold
Half
Fold
Selects half fold
Detail setting screen for each folding type
Inside
Folds paper so that the print side faces downward
during output
A3 B4 A4R
8 X11R
1
2
11 X178 X14
1
2
Select the size of paper to be folded with
Z-fold
(One of either 11" x 17", 8-1/2" x 14", 8-1/2"
x 11"R, A3, B4 and A4R can be selected)
Outside
Folds paper so that the print side faces upward
during output
Fold Multiple Sheets Together
Select this option to fold multiple sheets together
Open Left
Folds paper for left binding during output
Original Image Output Image
Displays a folding image
Open Right
Folds paper for right binding during output