EasyManua.ls Logo

Toshiba e-Studio 907 - Storage of Supplies; Proper Storage; Storing Toner Cartridges; Staple Cartridge

Toshiba e-Studio 907
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
SUPPLIES
Standard supplies for this product that can be replaced by the user include paper,
toner cartridges, and staple cartridges for the nisher.
Be sure to use only TOSHIBA-specied products for the toner cartridges, nisher
staple cartridge, and transparency lm.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which
may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts.
Consumables too, are available for 7 years following the termination of production.
Proper storage
1. Store the supplies in a location that is:
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
2. Store paper in the wrapper and lying at.
3. Paper stored in packages standing up or out of the wrapper may curl or become
damp, resulting in paper misfeeds.
GENUINE SUPPLIES
For best copying results, be sure to use only TOSHIBA Genuine Supplies which are
designed, engineered, and tested to maximize the life and performance of TOSHIBA
products. Look for the Genuine Supplies label on the toner package.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store a toner
cartridge standing on end. If stored standing on end, the toner may not distribute
well even after shaking the cartridge vigorously, and will remain inside the cartridge
without owing out.
Staple cartridge
The nisher and saddle nisher require the following staple cartridge:
MX-SCX3 (for saddle stitch of saddle stitch nisher)
Approx. 2000 per cartridge 4 cartridges
MX-SCX2 (for nisher (large stacker) and saddle stitch nisher (large stacker))
Approx. 5000 per cartridge 3 cartridges
MX-SCX1 (for saddle stitch of saddle stitch nisher (large stacker))
Approx. 5000 per cartridge x 3 cartridges
AR-SC2 (for nisher and saddle stitch nisher)
Approx. 5000 per cartridge x 3 cartridges
Storage of supplies

Related product manuals