Toshiba e-Studio 907 - FINISHER SPECIFICATIONS; MX-FN24 and MX-FN21 Finisher Details

22
Name Finisher (50-sheet stapling)
Paper sizes Depends on feeder specications
Useable paper 13 lbs bond to 110 lbs cover (52 to 300 g/m
2
)
No. of trays 2
Tray capacity (21 lbs (80 g/m
2
)) *
Upper tray
Non-stapled 12" × 18" (A3W) / 9" × 12" (A4W) / 11" × 17" (A3) / 8-1/2"
× 14" (B4):50 sheets
8-1/2" × 11" (A4) to 5-1/2" × 8-1/2"R (A5R): 250 sheets
Lower tray
Non-stapled 12" × 18" (A3W) / 9" × 12" (A4W) / 11" × 17" (A3) / 8-1/2"
× 14" (B4) / 8-1/2" × 11"R (A4R) / 5-1/2" × 8-1/2" (B5) /
7-1/4" × 10-1/2"R (B5R): 1,500 sheets
8-1/2" × 11" (A4): 3,000 sheets
5-1/2" × 8-1/2"R (A5R): 100 sheets
Staple function 8-1/2" × 11" (A4): 150 units (2 to 19 sheets)
8-1/2" × 11"R (A4R) / 5-1/2" × 8-1/2" (B5): 100 units (2 to
14 sheets)
11" × 17" (A3) / 8-1/2" × 14" (B4): 100 units (2 to 14
sheets)
Max. no. of stapled sheets
(21 lbs (80 g/m
2
))
Max. no. of 50 sheets (8-1/2" × 11" (A4) / 8-1/2" × 11"R (A4R)/ 5-1/2" × 8-1/2" (B5)
/ 7-1/4" × 10-1/2"R (B5R))
Max. no. of 30 sheets (11" × 17" (A3) /8-1/2" × 14" (B4))
Staple position Front: 1 position, Back: 1 position, Center: 2 positions, At slant: 1 position
Required power supply Supplied from the machine
Dimensions
When output paper tray is stored
25-55/64" (W) × 24-13/64" (D) × 38-17/32" (H)
(657 mm (W) × 615 mm (D) × 979 mm (H))
When output paper tray is extended
29-13/32" (W) × 24-13/64" (D) × 40-13/16" (H)
(747 mm (W) × 615 mm (D) × 1,037 mm (H))
Weight Approx. 103.6 lbs (47 kg)
* The amount of paper able to be used may vary depending on the environment the machine is operated in, the type of
paper used, and how the paper is stored.
Name Finisher (100-sheet stapling)
Paper sizes Depends on feeder specications
Useable paper 13 lbs bond to 110 lbs cover (52 to 300 g/m
2
)
No. of trays 3
Tray capacity (21 lbs (80 g/m
2
)) *
Upper tray
Non-stapled 12" × 18" (A3W) / 9" × 12" (A4W) / 11" × 17" (A3) /8-1/2"
× 14" (B4) / SRA3 / SRA4: 750 sheets
8-1/2" × 11" (A4) / 8-1/2" × 11"R (A4R, B5) /7-1/4" × 10-
1/2"R (B5R) / 5-1/2" × 8-1/2"R (A5R): 1,500 sheets
Staple function 11" × 17" (A3) / 8-1/2" × 14" (B4): 50 units or 750 sheets
8-1/2" × 11" (A4) / 8-1/2" × 11"R (A4R, B5): 100 units or
1,500 sheets
Center tray
Non-stapled 12" × 18" (A3W) / 9" × 12" (A4W) / 11" × 17" (A3) / 8-1/2"
× 14" (B4) / SRA3 / SRA4: 125 sheets
8-1/2" × 11" (A4) / 8-1/2" × 11"R (A4R, B5) / 7-1/4" × 10-
1/2"R (B5R) / 5-1/2" × 8-1/2"R (A5R): 250 sheets
Lower tray
Non-stapled 12" × 18" (A3W) / 9" × 12" (A4W) / 11" × 17" (A3) / 8-1/2"
× 14" (B4) / SRA3 / SRA4: 750 sheets
8-1/2" × 11" (A4) / 8-1/2" × 11"R (A4R, B5) / 7-1/4" × 10-
1/2"R (B5R) / 5-1/2" × 8-1/2"R (A5R): 1,500 sheets
8-1/2" x 11"/A4/B5 Non offset: 2,500 sheets
Staple function 11" × 17" (A3) / 8-1/2" × 14" (B4): 50 units or 750 sheets
8-1/2" × 11" (A4) / 8-1/2" × 11"R (A4R, B5): 100 units or
1,500 sheets
• Offset output is not available for 12" × 18" (A3W) / 7-1/4" × 10-1/2"R (B5R) /
5-1/2" × 8-1/2"R (A5R).
Max. no. of stapled sheets
(21 lbs (80 g/m
2
))
Max. no. of 100 sheets (8-1/2" × 11" (A4), B5)
Max. no. of 50 sheets (11" × 17" (A3), 8-1/2" × 14" (B4), 8-1/2" × 11"R (A4R))
Staple position 1 bottom, 1 top, 2 middle
Required power supply AC 120V 60Hz
Dimensions
When output paper tray is stored
25-3/4" (W) × 30-1/8" (D) × 40-15/16" (H)
(654 mm (W) × 765 mm (D) × 1040 mm (H))
When output paper tray is extended
30-51/64" (W) × 30-1/8" (D) × 40-15/16" (H)
(782 mm (W) × 765 mm (D) × 1040 mm (H))
Weight Approx. 134.5 lbs (61 kg)
MX-FN24 MX-FN21
Finisher
SPECIFICATIONS