3.Setting the IP Fax Function
20 Setting the IP Fax Function from TopAccess
14 Memory Transmission Report Selects how to print a result report after a memory transmission.
OFF — Select this to not print a memory transmission report.
Always — Select this to print a memory transmission report with all page
images for each memory transmission completed.
ON ERROR — Select this to print a memory transmission report with all
page images only when the memory transmission is not successfully
completed.
Always (Print 1st Page Image) — Select this to print a memory
transmission report with the 1st page image for each memory
transmission completed.
ON ERROR (Print 1st Page Image) — Select this to print a memory
transmission report with the 1st page image only when the memory
transmission is not successful.
15 Multi Transmission Report Selects how to print a result report after a multi-address transmission.
OFF — Select this to not print a multi-address transmission report.
Always — Select this to print a multi-address transmission report with all
page images for each multi-address transmission completed.
ON ERROR — Select this to print a multi-address transmission report with
all page images only when the multi-address transmission is not
successfully completed.
Always — Select this to print a multi-address transmission report with the
1st page image for each multi-address transmission completed.
ON ERROR (Print 1st Page Image) — Select this to print a multi-address
transmission report with the 1st page image only when the multi-address
transmission is not successful.
16 RX End Tone Selects how to sound the RX end tone after the completion of reception.
OFF — The RX end tone does not sound.
Print End — The RX end tone sounds at the completion of printing.
Receive End — The RX end tone sounds at the completion of reception.
17 TX End Tone Selects how to sound the TX end tone after the completion of transmission.
OFF — The TX end tone does not sound.
Always — The TX end tone sounds at the completion of transmission.
ON ERROR — The TX end tone sounds in the case of a transmission failure.
Normal End — The TX end tone sounds at the normal completion of
transmission.
Item name Description
To Next Page
Loading...
Need help?
General
