3.Setting the IP Fax Function
Setting the IP Fax Function from TopAccess 21
Setting the IP Fax Function
*1 This function is not available for some models.
18 Secure Receive You can set the Secure Receive function to store received IP Fax jobs in the
equipment without printing them.
With this function, you can prevent the leaking of confidential information
in an IP Fax received when no people are present in your office, such as
nighttime or holidays, or when an unspecified number of people visit your
office.
Enable — Select this to enable the Secure Receive function.
Disable — Select this to disable the Secure Receive function.
Weekly Schedule — Select this to set whether the Secure Receive
function is enabled or disabled for each day of the week.
You can set the time to enable and disable the Secure Receive function
(24-hour display).
- For a day on which you want to enable the Secure Receive function all
day, specify “00:00” for “Disable” and “00:00” for Enable.
- For a day on which you want to disable the Secure Receive function all
day, specify “00:00” for “Disable” and “24:00” for Enable.
To print the IP Fax jobs the Secure Receive function received, you must set
[Password] and [Retype Password]. For the password, you can enter up to
20 alphanumerical characters and symbols (! # ( ) * + , - . / : ; = ? @ $ ^ _ ` { | }
~ \).
Item name Description
To Next Page
Loading...
Need help?
General
