118
5.USING THE EDITING FUNCTIONS
6.MAGAZINE SORT (FROM THE EDITING MENU) (Cont.)
5
4
Press the [EDIT] button to enter the edit
menu, and then press the [MAGAZINE
SORT] button.
5
Adjust the binding margin and then press
the [ENTER] button.
- The default width of the margin is 2 mm (0.08”).
- To adjust the width, press the [2 mm] or [30 mm] button to select
the desired number, then press the [ENTER] button.
- If the optional finisher (MJ-1024) equipped with the saddle stitch
is installed, copied paper can be automatically stapled along their
center line. Press the [STAPLE ON] button to staple it.
- Maximum number of sheets that can be stapled. "Available
Conditions for Saddle Stitch" Page 86
z Select other copy modes as required.
6
Press the [START] button.
- When placing an original on the glass, follow steps 5 to 6 on
"Copying Procedure" Page 53 continuously.
To Next Page
Loading...
