135
5
Single-feed Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 38
2
Press the [EDIT] button to enter the edit
menu, and then press the [ADF] button.
- If the desired function buttons are not displayed, press the [NEXT]
button or [Prev] button to change the menu.
3
Press the [SADF] button.
z Select other copy modes as required.
4
Place the original on the reversing
automatic document feeder (optional).
- "Inside the Single-feed Mode" Page 52
- The original is automatically pulled in and the screen changes as
shown on the right.
- If there are more originals, set them in the same way. (The same
operation is performed whether or not you press the [YES]
button.)
5
After all originals have been fed through
the reversing automatic document feeder,
press the [FINISHED] button.
- Copying begins.
To Next Page
Loading...
