159
7
9
Press the [EDIT] button and set the
original size and type.
- After step 9 is finished, press the [NEXT] button.
10
Set the size of the attached data.
- Image data are divided into some small blocks to be sent.
FRAGMENT MESSAGE SIZE (KB): NONE, 64 KB, 128 KB, 256
KB, 512 KB, 1024 KB, 2048 KB
Press the [Next] or [Prev] button to switch the screen and make
necessary settings.
The volume of the high-resolution image data may be very large.
When sending E-mail, be careful not to exceed the mail server
capacity of both the transmitter and the receiver.
- If the software for E-mail is not able to divide the data properly,
resend it after setting smaller fragment message size.
- If the data size exceeds the specified size, it is divided into the
specified size to be sent.
- If the E-mail receiver uses a different controller and the attached
file is PDF format, the attached file can not be printed.
To Next Page
Loading...
