Toshiba E-STUDIO E-Studio 3511

To Next Page

To Previous Page

265

Furthermore, pull it out with both hands to

remove it.

8. Paper Misfeed in the Relay Unit (optional)

Holding the cover handle of the relay unit,

open the cover.

Remove any misfed paper that is inside

the relay unit.

z Remove the misfed paper from the fuser unit side if it is easier.

Close the relay unit cover.

Main Page

Table of Contents3
Notice to Users7
Toshiba Quality Is Second to None9
Preface11
FEATURES of the E-STUDIO3511/451112
General Precautions13
When Installing or Moving13
- When Using the Multifunctional Digital Color Systems16
- During Maintenance or Inspection18
- When Handling Supplies19
Disclaimer Notice20
Forgery Prevention Function/Storage of Color Copies21
Before Using Equipment23
- Description of each Component24
- Turning on the Power Switch34
- Switching to the Energy-Saving Mode38
How to Make Copies39
- Setting Copy Paper40
- Setting Originals49
- General Copying Procedures55
- Initial (Default) Settings55
- Start Button57
- Auto Job Start (Job Preset)58
- Confirming and Canceling Auto Job Start59
- Interrupt Copying60
- Stopping the Copy Operation61
- Bypass Copying62
- Setting of Basic Copy Modes69
Setting of Basic Copy Modes70
- Paper Selection70
- Black-And-White/Color Copy Mode Selection75
- Reduction and Enlargement Copying76
- Automatic Magnification Selection (Ams)76
- Specifying both Original Size and Copy Size77
- Selecting Finishing Modes80
- Duplex Copying90
  - For Making 1-Sided, 2-Sided and Book-Type Copies90
- Original Mode96
- Copy Density Adjustment98
- Automatic Copy Density Modes98
- Manual Copy Density Mode98
Image Editing and Image Adjustment99
- Color Balance (Ymck Adjustment)100
- Rgb Adjustment101
- One-Touch Adjustment102
- Clear Button102
- Background Adjustment103
- Sharpness Adjustment104
- Twin (2-Color) Copying105
- Twin Copy with Selected Colors105
Using the Editing Functions109
- Image Shift110
- Creating a Bookbinding Margin111
- Edge Erase113
- Book Center Erase114
- Dual-Page115
- In 1/4 in 1117
- In 1/4 in 1118
- Magazine Sort (from the Editing Menu)119
- Image Editing121
  - Trimming/Masking121
  - Mirror Image123
- X-Y Zoom124
- Cover Copying125
- Sheet Insertion Mode128
- Time & Date Stamp130
- Page Numbering131
- Direction of Copy Images in "1 to 2" and "2 to 1133
- Direction of Copy Images in "1 to 2" and "2 to 1134
- Direction of Duplex Copy Images in "2 to 2135
- Continuous/Single Original Feeding136
- Single-Feed Mode137
Storing Originals139
- STORE to E-FILING140
- Save as File143
- Entering Letters146
Scanning the Images147
- Scan Setting in the Touch Panel148
- Scanning Procedure148
- SCAN to E-FILING150
- Scan to File154
- Scan to E-Mail158
Internet Fax163
- Internet Fax164
- Sending Internet Fax166
- Receiving Internet Fax183
- Receiving Modes183
- Receiving from Smtp Server184
- Receiving from Pop3 Server184
Job Status185
- Job Status186
- Print Job List187
- Proof Print Job190
- Performing the Proof Print190
- Deleting a Job191
- Private Print Job192
- When Using the Department Codes194
- Confirming the Status of Fax/Internet Fax Job196
- Confirming the Status of Scan197
- Log List198
  - Log198
  - Scan Log200
- Address Registration from Log Lists201
- Printing Send/Receive Log List of Fax203
- Status204
- Error Code206
E-FILING217
- E-FILING FUNCTIONS218
- Setting up Box220
- Changing Input Data222
- Deleting Box224
- Printing Stored Document225
- Print the Whole Document225
Template229
- Template230
- Recalling Template231
- Registering Template234
- Registering the Template in the User Group236
- Changing Input Data239
- Changing the Data of User Group241
- Deleting Template243
- When the Graphic Symbols Blink on the Touch Panel247
- Description of the Blinking Graphic Symbols248
- Add Paper Symbol250
  - Adding Paper to the Drawers250
  - Adding Paper to the Large Capacity Feeder (Optional)251
- Replace Toner Cartridge Symbol252
- Recommendation for Original Toner253
When the Graphic Symbols Blink on the Touch Panel254
- Replacing the Black (K) Toner Cartridge254
- Replace Toner Bag Symbol259
- Front Cover259
- Clear Paper Symbol260
- Paper Misfeed on the Bypass Feed Unit264
- Paper Misfeed in the Automatic Duplexer264
- Adding Staples (Optional)274
- Staple Cartridge275
- Pull the Lever and Move the Finisher Away278
- Carefully from the Equipment278
- Removing Jammed Staples (Optional)280
- Lower the Staple Cover While Holding the281
- Remove any Jammed Staples281
- Disposing of the Punched Paper Bits (Optional)287
- Call Service Symbol/Periodic Maintenance Message288
Maintenance289
- Daily Inspection290
- Items for Daily Check290
- Simple Troubleshooting291
- Image Density Is too Low292
- Image Density Is too High292
- Images Are Stained293
- Images Are Blurred293
- Functions Cannot be Set294
- Images Are Partially Missing294
Specifications & Options295
- E-STUDIO3511/4511 SPECIFICATIONS296
- Specifications of Options299
- Packing List306
- Copying Function Combination Matrix307
  - Combination Matrix 1/2307
  - Combination Matrix 2/2308
- Image Quality Adjustment Combination Matrix309

Toshiba E-STUDIO E-Studio 3511 - Page 267

Table of Contents

Related product manuals