61
2
- Draw the triple paper holder depending on the paper size.
- Raise (B) before placing LD/A3 size or larger.
2
Place the original(s).
3
Press the button that represents the size
of the paper that has been set for LD, LG,
LT and ST-R.
When the paper size is not specified, the copying speed may be
lower due to the cleaning operation inside the copier.
4
When the standard size paper other than
LD, LG, LT and ST-R is set, press the
[OTHER SIZE] button.
- See "Setting the [OTHER SIZE] button" Page 71.
5
Press the paper size button
corresponding to the paper that has been
set.
(
B
)
To Next Page
Loading...
