e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 12
3) Electronic Filing related error
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2B10 There was no applicable job. No applicable job error in job control
module
P. 5-83
2B11 Job status failed. JOB status abnormality P. 5-83
2B20 Failed to access file. File library function error P. 5-83
2B30 Insufficient disk space. Insufficient disk space in /SHR partition P. 5-83
2B31 Failed to access Electronic Filing. Status of specified Electronic Filing or
folder is undefined or being created/
deleted
P. 5-83
2B32 Failed to print Electronic Filing
document.
Electronic Filing printing failure:
Specified document can not be printed
because of client's access (being edited,
etc.).
P. 5-83
2B50 Failed to process image. Image library error P. 5-83
2B51 Failed to process print image. List library error P. 5-83
2B71 Document(s) expire(s) in a few
days
Documents expiring in a few days exist -
2B80 Hard Disk space for Electronic
Filing nearly full.
Hard disk space in /SHR partition is
nearly full (90%).
-
2B90 Insufficient Memory. Insufficient memory capacity P. 5-83
2BA0 Invalid Box password specified. Invalid Box password P. 5-84
2BB0 Job canceled Job canceling -
2BB1 Power failure occurred Power failure P. 5-84
2BC0 System fatal error. Fatal failure occurred. P. 5-83
2BC1 Failed to acquire resource. System management module resource
acquiring failure
P. 5-83
2BD0 Power failure occurred during e-
Filing restoring.
Power failure occurred during restoring
of Electronic Filing
P. 5-84
2BE0 Failed to get machine parameter. Machine parameter reading failure P. 5-84
2BF0 Maximum number of pages has
been exceeded (list Maximum)
Exceeding maximum number of pages P. 5-84
2BF1 Maximum number of documents
has been exceeded (list Maxi-
mum)
Exceeding maximum number of docu-
ments
P. 5-84
2BF2 Maximum number of folders has
been exceeded (list Maximum)
Exceeding maximum number of folders P. 5-84
To Next Page
Loading...
